Description
The Trumeter 3410-2000 is a fully sealed electronic hour meter in a flush rectangular housing that mounts from behind the panel with a retainer. It runs on any supply from 10 to 300VDC or 20 to 300VAC at 50/60Hz, so one part covers 12V and 24V DC equipment as well as 115V and 230V AC machinery.
Typical applications include generators and pumps, control panels, production and test equipment, medical devices, marine equipment, lawn mowers and garden tractors, and any asset where recorded run hours drive the maintenance schedule.
The meter is self-powered with a battery life of over ten years, so there is nothing to wire in beyond the run signal, and the large 7mm LCD figures sit behind a polarised lens that stays readable outdoors.
Key Benefits
- Wide 10-300VDC and 20-300VAC input – one meter covers 12V, 24V, 115V and 230V equipment
- Self-powered with a 10+ year battery life – no external supply or separate wiring
- Large 0.28″ [7mm] LCD figures behind a polarised lens for outdoor readability
- Records to 9999999.9 hours at ±0.1% accuracy, with a blinking decimal point as the run indicator
- Totally sealed case – NEMA 4/4X, 12 and IP66 with the optional gasket
- Flush rectangular mount – held by a retainer from behind, leaving a clean panel face
- Non-reset – the total cannot be cleared, so recorded hours stay auditable
- Direct replacement for the discontinued GDI N62 and N63 Series – see below
Specifications
- Type – Electronic hour meter, non-reset
- Operating voltage – 10-300VDC and 20-300VAC, 50/60Hz, <2mA
- Display – LCD, 0.28″ [7mm] figures, black on light background, reading to 9999999.9 hours
- Resolution – 0.1 hour
- Accuracy – ±0.1%
- Power – Self-powered, battery life 10+ years
- Mounting – Flush rectangular, retainer mount
- Terminations – 0.250″ [6.4mm] spades
- Sealing – Totally sealed; NEMA 4/4X, 12 and IP66 achieved with the optional gasket
- Temperature range – -10°C to +60°C
- Vibration and shock – 44 to 55g per SAE J1378
- EMC – EN61326; protected against 150V alternator load dump
- Approvals – UL and cUL recognised (file # ELIY2.E36690), CE, SAE, UKCA, WEEE and RoHS compliant
- Weight – approx. 28g (1 oz)
- Brand – Trumeter
Competitor Replacements
The 3410-2000 is Trumeter’s direct replacement for the discontinued GDI electronic hour meters listed below.
- GDI, flush (retainer) mount – N62 Series, N63 Series
Both GDI series used 1/4″ spade terminations, the same as the 3410-2000. Cross-reference data published by Trumeter. Replacing a part number that is not on this list? Get in touch and we will check it for you.
