Description
The Trumeter 3410-0000 is a fully sealed electronic hour meter in a rectangular, 2 hole mount housing. It runs on any supply from 10 to 300VDC or 20 to 300VAC at 50/60Hz, so one part covers 12V and 24V DC equipment as well as 115V and 230V AC machinery.
Typical applications include generators and pumps, control panels, production and test equipment, medical devices, marine equipment, lawn mowers and garden tractors, and any asset where recorded run hours drive the maintenance schedule.
The meter is self-powered with a battery life of over ten years, so there is nothing to wire in beyond the run signal, and the large 7mm LCD figures sit behind a polarised lens that stays readable outdoors.
Key Benefits
- Wide 10-300VDC and 20-300VAC input – one meter covers 12V, 24V, 115V and 230V equipment
- Self-powered with a 10+ year battery life – no external supply or separate wiring
- Large 0.28″ [7mm] LCD figures behind a polarised lens for outdoor readability
- Records to 9999999.9 hours at ±0.1% accuracy, with a blinking decimal point as the run indicator
- Totally sealed case – NEMA 4/4X, 12 and IP66 with the optional gasket
- Rectangular 2 hole mount – a standard industry housing, so it drops into existing panel cut-outs
- Non-reset – the total cannot be cleared, so recorded hours stay auditable
- Direct replacement for discontinued Hobbs, Honeywell, Eaton and GDI hour meters – see below
Specifications
- Type – Electronic hour meter, non-reset
- Operating voltage – 10-300VDC and 20-300VAC, 50/60Hz, <2mA
- Display – LCD, 0.28″ [7mm] figures, black on light background, reading to 9999999.9 hours
- Resolution – 0.1 hour
- Accuracy – ±0.1%
- Power – Self-powered, battery life 10+ years
- Mounting – Rectangular, 2 hole mount
- Terminations – 0.250″ [6.4mm] spades
- Sealing – Totally sealed; NEMA 4/4X, 12 and IP66 achieved with the optional gasket
- Temperature range – -10°C to +60°C
- Vibration and shock – 44 to 55g per SAE J1378
- EMC – EN61326; protected against 150V alternator load dump
- Approvals – UL and cUL recognised (file # ELIY2.E36690), CE, SAE, UKCA, WEEE and RoHS compliant
- Weight – approx. 28g (1 oz)
- Brand – Trumeter
Competitor Replacements
The 3410-0000 is Trumeter’s direct replacement for the discontinued Hobbs, Honeywell, Eaton and GDI electronic hour meters listed below. Hobbs and Honeywell used the same part numbers, so if you are replacing any of these, this is the meter you want.
- Hobbs / Honeywell, 2 screw mount – LM-HH2AS-H11, LM-HH3AS-H11, LM-HH4AS-H11, LM-HHFAS-H11
- Eaton, 2 hole mount – E42DI241260, E42DI2448230
- GDI, 2 screw mount – N42 Series, N43 Series
All of these used a 1/4″ blade or spade termination, the same as the 3410-0000. Cross-reference data published by Trumeter. Replacing a part number that is not on this list? Get in touch and we will check it for you.
