Description
This is the Trumeter 3602-001TG six digit mechanical totalising counter supplied complete with the 007574 rubber covered measuring wheel – a ready-to-fit length measuring head rather than a bare counter.
The counter is geared 1:1 and registers one count for every revolution of the wheel, so with the 500mm wheel fitted each count is half a metre of material passing under it.
It is set up top going (shaft top rotating away from the operator). Built for continuous duty at speed: the main shaft runs in double bronze bearings that are oil impregnated for life, and the counter will take 3000 RPM all day. Typical applications include cable, wire, hose and textile length measurement, packaging and converting lines, and winding and spooling equipment. The reset lever can be mounted on either side to suit the machine.
Key Benefits
- Counter and measuring wheel supplied together – nothing else to source or fit
- 1:1 gearing – one count per revolution of the wheel, or half a metre of travel per count
- Rated to 3000 RPM and 3000 counts per minute for continuous high speed operation
- Bronze bearings oil impregnated for life – no lubrication schedule
- Reset lever mounts on either side of the counter to suit the machine
- Entirely mechanical – no power, no batteries, nothing to fail in a power cut
- Replaces discontinued Eaton base mount rotary counters – see below
Specifications
- Model – 3602-001TG supplied with the 007574 wheel
- Type – Mechanical totalising counter, top going (shaft top rotating away from the operator)
- Digits – 6
- Measurement – Units (one count per wheel revolution = 500mm of travel)
- Gearing – 1:1
- Count rate – One count per a revolution
- Display – White on black, 6.4mm (0.25in) figures
- Reset – Lever, mountable on either side
- Drive – Double drive with wing bush, 7mm (0.275in) diameter shaft
- Bearings – Bronze, oil impregnated for life
- Operating torque – 180g.cm (2.5oz.in)
- Maximum shaft speed – 3000 RPM
- Maximum count speed – 3000 CPM
- Accuracy – ±1%
- Materials – Black PC-ABS base, grey ABS cover
- Temperature – Operating -10°C to +50°C, storage -20°C to +50°C
- Environmental protection – IP40
- Weight – 200g net (counter)
- Wheel – 007574, 500mm circumference, 19mm tread, black PC-ABS with rubber cover, installation hardware included
- Brand – Trumeter
Competitor Replacements
Trumeter lists the 3602 Series as the replacement for the discontinued Eaton base mount rotary counters below.
- Eaton, base mount rotary counters – 4-CS-7 Series, 5-CS-7 Series, 5-D-7 Series, 5-H-7 Series, 5-H-9 Series, 5-HDW-7 Series
Trumeter also cross-references the Danaher and Veeder-Root base mount rotary counters 195316-051, 195316-052, 195326-045, 195326-046, 743415-003 and 743415-005 to other 3602 Series configurations (3602-041 and 3602-053), which we can order in for you. Cross-reference data published by Trumeter. Replacing a part number that is not on this list? Get in touch and we will check it for you.
