Description
The DEUTSCH P24-18-6PN is a 6-way HDP20 receptacle connector-half kit built around the genuine HDP24-18-6PN housing. It supplies pin contacts for crimp termination and normal seals for a serviceable circular connection on compatible vehicle, agricultural, off-highway and industrial wiring.
This is one connector half, not a full mating pair. The matching plug must be ordered separately. Plug/receptacle describes the housing style; pin/socket describes the contact type.
Key Benefits
- Genuine TE Connectivity DEUTSCH housing and contacts
- Panel-mount receptacle supplied with a panel nut and lockwasher
- Thermoplastic shell with silicone seals
- Rear-inserted contacts are serviceable with suitable removal tools
- Seal variant N – normal seals
Kit Components
- 1 × HDP24-18-6PN receptacle housing
- 2 × size 4 pin contacts
- 4 × size 16 pin contacts
- 1 × size 4 contact removal tool
- 1 × size 16 contact removal tool
- 1 × 2411-002-1805 panel nut
- 1 × 2414-002-1886 lockwasher
Specifications
- Kit SKU: P24-18-6PN
- Manufacturer housing part number: HDP24-18-6PN
- Series: DEUTSCH HDP20
- Housing style: Receptacle
- Contact type: Pin
- Shell size: 18
- Cavities: 6 (2 × size 4; 4 × size 16)
- Wire-seal code: N – normal seals
- Termination: crimp
- Operating temperature: −55°C to +125°C
- Environmental sealing requires correct wire insulation diameter, properly sealed unused cavities and a fully mated assembly
Contact Selection
- Size 4: confirm the supplied contact wire range before crimping; rated up to 100 A per contact under the manufacturer’s specified conditions
- Size 16: confirm the supplied contact wire range before crimping; rated up to 13 A per contact under the manufacturer’s specified conditions
Current ratings apply to individual contacts, not the combined connector. Conductor size, temperature, circuit loading and installation affect allowable current. The wire conductor must fit the contact and its insulation must fit the housing seal; these are separate checks.
Compatibility & Installation
Match the opposite housing style, shell size, cavity arrangement and complementary pin/socket contacts. Check keying, any modification suffix and the wire-seal requirements against the manufacturer documentation. N, T and E seal variants are not interchangeable wire-size specifications.
Crimp using tooling suitable for the supplied contacts, insert from the rear and check retention. Close unused cavities with the correct sealing blanks. Follow the HDP20 assembly instructions before mating and locking the bayonet coupling. Wire, crimping tools, backshells, dust caps and the mating connector half are not included. The listed nut and lockwasher are included.
