Description
Pressure Switch 15psi Adjustable 14-24psi SPST for Hobbs 76052, 76057
The APS 14.24 is an adjustable pressure switch for universal automotive, industrial and plant applications, supplied pre-set at 15psi and adjustable anywhere across 14-24psi. It is a direct replacement and an upgrade for the discontinued Honeywell / Hobbs 5000 Series switches it supersedes.
The body is stainless steel and reinforced polyester with a Kapton/Teflon dual diaphragm, so it copes with air, water, oil and fuels or hydrocarbons across -40°C to +120°C. It is supplied with a Deutsch plug and socket on a bare-ended harness, which makes installation a plug-in job rather than a wiring exercise.
Because the switch is adjustable rather than fixed, one part number covers every set point across its band – useful where you are matching an existing alarm or shutdown point rather than starting from scratch.
Key Benefits
- Adjustable 14-24psi, pre-set at 15psi – one part covers every set point in the band
- Single circuit SPST, normally open – simple, direct switching
- Deutsch plug and socket supplied on a bare-ended harness – plug-in installation
- Stainless steel and reinforced polyester body with a Kapton/Teflon dual diaphragm
- Suits air, water, oil and fuels or hydrocarbons, -40°C to +120°C
- Switches 8A at 12VDC, 4A at 24VDC and 0.5A at 240VAC; UL, cUL and CE certified
- Direct replacement and upgrade for Honeywell / Hobbs 5000 Series – see below
Specifications
- Model – APS 14.24
- Type – Adjustable pressure switch, single circuit
- Circuit – Normally open, SPST
- Adjustable pressure range – 14-24psi, pre-set to 15psi
- Contact rating – 8A at 12VDC, 4A at 24VDC, 0.5A at 240VAC
- Port connection – 1/8 NPT (1/4 NPT available using the C1814 thread adaptor)
- Maximum operating pressure – 150psi (0.5-24psi models)
- Burst pressure – 750psi (0.5-24psi models)
- Operating temperature – -40°C to +120°C
- Diaphragm – Kapton/Teflon, dual
- Body materials – Stainless steel and reinforced polyester
- Compatible media – Air, water, oil, fuels and hydrocarbons
- Termination – Deutsch plug and socket with bare-ended harness
- Certifications – UL, cUL, CE
- Brand – Alna
Competitor Replacements
The APS 14.24 replaces and upgrades the Honeywell / Hobbs 5000 Series pressure switches below. Both brands used the same part numbers, so if you are replacing either of these, this is the switch you want.
- Honeywell / Hobbs 5000 Series – 76052, 76057
The APS switch is an upgrade rather than a like-for-like copy: it is adjustable across 14-24psi instead of fixed, and it comes with a Deutsch plug and socket in place of the original termination. Replacing a part number that is not on this list? Get in touch and we will check it for you.
