Trumeter SC-M2-DIN M2 Signal Conditioner DIN Rail Multi-Function 100-240VAC

A DIN rail-mount, mains-powered signal conditioner for current, voltage, or frequency, 100-240VAC, 1% accuracy.

🚚Dispatch times vary on this itemPlease contact us for current lead times and a quotation.
SKU: SC-M2-DIN Categories: ,

Description

Trumeter M2 Signal Conditioner for Mains-Powered Multi-Function Monitoring

The Trumeter M2 (SC-M2-DIN) is the mains-powered sibling to the M1, measuring current, voltage, or frequency from a single DIN rail-mount housing. It runs directly from a 100-240V AC supply, so it drops into a panel without needing a separate low-voltage transformer or power supply. As a result, it suits retrofits where a spare 12-24V feed is not available.

  • 3-in-1 input: current (0-5A direct or up to 10,000A via CT), voltage (0-600V AC/DC), or frequency (2-400Hz)
  • Mains powered: 100-240V AC, 50-60Hz, no external PSU required
  • Two configurable outputs: digital (open collector) or analog (4-20mA)
  • 1.0% measurement accuracy
  • 10 alarm setpoints with configurable digital output delays

Because the M2 takes its power straight from mains, installers save the cost and panel space of a separate 12-24V supply. For example, use it on a switchboard or distribution panel where mains is already present but a low-voltage rail is not. It is also cloud-ready, connecting to Trumeter Cloud via the optional IoT Gateway for remote monitoring.

Configuration and Installation

The M2 clips onto standard Top Hat Slotted (TS35) DIN rail and measures 72mm x 72mm x 61mm, matching the M1’s footprint so the two can be mixed in the same enclosure. Configuration runs through Trumeter’s free software over USB, with 20-point non-linearization scaling available for non-linear sensors. Therefore, one stocked unit can be configured on-site for the required input, range, and alarm behaviour.

The unit carries CE, cUL, UL, RoHS, and IP20 ratings, covering most industrial and OEM panel-building requirements without extra certification paperwork.

Specifications

  • Input: 0-5A direct / 0-10,000A via CT, 0-600V AC/DC, or 2-400Hz
  • Power Supply: 100-240V AC, 50-60Hz
  • Outputs: 2 x configurable digital (open collector) or analog (4-20mA)
  • Accuracy: 1.0%
  • Dimensions: 72mm x 72mm x 61mm
  • Mounting: Top Hat Slotted (TS35) DIN rail
  • Certifications: CE, cUL, UL, RoHS, IP20
Hit enter to search or ESC to close